Braeburn 162026 User Manual download pdf

162026

MEDIA

AIR CLEANER

INSTALLATION INSTRUCTIONS

BRAEBURN

MEDIA AIR CLEANER

IMPORTANT: A 26 INCH CLEARANCE MUST BE ALLOWED FOR REMOVAL OF THE MEDIA CARTRIDGE

FROM THE CABINET.

RETURN AIR

WARM AIR

1. Turn off electricity to furnace.

2. Remove front cover.

3. Slide media cartridge from air cleaner cabinet, and discard packing material.

4. Remove and discard existing furnace air filter.

5. Install cabinet in return air system. See typical installations.

6. Slide the media cartridge into the cabinet. Be sure the airflow arrow on the cartridge is in the same direction as the

arrow in the cabinet. The wire mesh is always on the downstream side of the filter media. Replace cover.

7. If the optional air filter gauge accessory (model 169000) is to be used, install on a vertical duct surface or on air cleaner

cover between the air cleaner and the furnace blower.

8. Turn on electricity and furnace and check performance of all equipment.

This air cleaner is designed for use in systems up to

2000 CFM. For higher airflows additional units may

be required.

FOR INSTALLATION IN THE RETURN AIR DUCT OF ANY FORCED AIR HEATING AND COOLING SYSTEM

INSTALLER: LEAVE THESE INSTRUCTIONS WITH HOME OWNER

TYPICAL INSTALLATION

24.08

13.37

22.92

25.64

8.08

23.45

15.30

1 2

162026MEDIAAIR CLEANERINSTALLATION INSTRUCTIONSBRAEBURN®MEDIA AIR CLEANERIMPORTANT: A 26 INCH CLEARANCE MUST BE ALLOWED FOR REMOVAL OF THE MEDIA CART

LIMITED WARRANTYThe Air Cleaner Media will normally need to be replaced every 4 to 6 months (end of the heating or cooling season) with normal usage.

No comments

Braeburn 162026 User Manual