Braeburn 1010 User Manual download pdf

MODEL

1010

Builder Series

Non-Programmable

Single Stage Heat/Cool

Thermostat

Compatible with low voltage single stage gas,

oil or electric heating or cooling systems,

including single stage heat pumps. Do not use

this thermostat on applications with voltages

above 30 Volts AC.

WARNING!

Important Safety Information

• Always turn off power to the air conditioning or heating system prior to installing,

removing, cleaning or servicing thermostat.

• Read this manual thoroughly prior to installing, programming or operating

this thermostat.

•

This thermostat is designed for use with a 24 Volt-AC low voltage single stage gas,

oil or electric heating or cooling systems, including single stage heat pumps.

• Do not use this thermostat on applications with voltages above 30 Volts AC.

•

The system must have 24 Volt AC power present for proper system operation and control.

• Wiring must conform to all building codes and ordinances as required by local and

national code authorities having jurisdiction.

• Do not short (or jumper) across terminals on the gas valve or at the heating or

cooling system control board to test the thermostat installation. This could

damage the thermostat and void the warranty.

• Do not select COOL mode of operation if the outside temperature is below 50˚ F

(10˚ C). This could possibly damage the controlled cooling system and may cause

personal injury.

• This thermostat should only be used as described in this manual. Any other use is

not recommended and will void the warranty.

SPECIFICATIONS

• Electrical Rating: 24 Volt AC (18-30 Volt AC)

1 amp maximum load per terminal

2 amp total maximum load (all terminals)

• Control Range: 45˚ - 90˚ F (7˚ - 32˚ C)

• Accuracy: +/- 1˚ F (+/- .5˚ C)

• Compatibility with low voltage single stage gas, oil or electric heating or cooling

systems, including single stage heat pumps.

• Terminations: R, C, G, Y, W, O, B

USER MANUAL

READ ALL INSTRUCTIONS BEFORE PROCEEDING

CONTENTS

SPECIFICATIONS

INSTALLATION

TESTING YOUR NEW THERMOSTAT

PROGRAMMING USER SETTINGS

ADDITIONAL OPERATION FEATURES

TROUBLESHOOTING

WIRING DIAGRAMS

Front

1 2 3 4 5

Summary of Contents

Page 1 - USER MANUAL

MODEL1010Builder SeriesNon-ProgrammableSingle Stage Heat/CoolThermostatCompatible with low voltage single stage gas, oil or electric heating or coolin

Page 2 - NEW THERMOSTAT

2 3INSTALLATION212. Make sure all of the wire connections are secure and are not touching any other terminal to prevent electrical shorts and pote

Page 3 - OPERATION FEATURES

4PROGRAMMINGUSER SETTINGS44.1Default Thermostat SettingsNOTE: To erase all user program settings, gently press RESET button using a paperclip or a sm

Page 4 - TROUBLESHOOTING

6 7TROUBLESHOOTING6SYMPTOM POTENTIAL SOLUTIONSYMPTOM POTENTIAL SOLUTIONThermostat turns heating or cooling system on too often or not often enough.Inc

Page 5 - Store this

8WIRING DIAGRAMS7R O BTypical Heat Pump SystemC Y W GFanControlCompressorControlReversingValve24 Volt ACTransformer120Volt ACHot Side CommonR O BTypic

Comments to this Manuals

No comments

Braeburn 1010 User Manual

Browse online or download User Manual for Equipment Braeburn 1010. Braeburn 1010 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Braeburn 1010