Braeburn 2100 User Manual download pdf

MODEL

2100

Builder Series

5-2 Day Programmable

Multi-Stage 2 Heat/1 Cool

Digital Thermostat

Compatible with low voltage multi-stage

heat/cool system with up to two stages of

heating and one stage of cooling. Do not use

this thermostat on applications with voltages

above 30 Volts AC.

WARNING!

Important Safety Information

• Always turn off power to the air conditioning or heating system prior to installing,

removing, cleaning or servicing thermostat.

• Read this manual thoroughly prior to installing, programming or operating

this thermostat.

• This thermostat is designed for use with a 24 Volt-AC low voltage single stage

gas, oil or electric heating or cooling systems.

• Do not use this thermostat on applications with voltages above 30 Volts AC.

• This thermostat requires two (2) properly installed "AA" alkaline batteries to

maintain system clock during power outages.

•The system must have 24 Volt AC power present for proper system operation

and control.

• Wiring must conform to all building codes and ordinances as required by local and

national code authorities having jurisdiction.

• Do not short (or jumper) across terminals on the gas valve or at the heating or

cooling system control board to test the thermostat installation. This could

damage the thermostat and void the warranty.

• Do not select COOL mode of operation if the outside temperature is below 50˚ F

(10˚ C). This could possibly damage the controlled cooling system and may cause

personal injury.

• This thermostat should only be used as described in this manual. Any other use is

not recommended and will void the warranty.

SPECIFICATIONS

• Electrical Rating: 24 Volt AC (18-30 Volt AC)

1 amp maximum load per terminal

3 amp total maximum load (all terminals)

• Control Range: 45˚ - 90˚ F (7˚ - 32˚ C)

• Accuracy: +/- 1˚ F (+/- .5˚ C)

• AC Power: 18-30 Volts AC

• DC Back-Up Power: 3.0 Volts DC (2 AA alkaline batteries included)

• Compatibility: Multi-stage heat / cool systems with up to two stages of heating

and one stage of cooling.

• Terminations: R, O, B, C, Y, W1, G, W2

INSTALLATION

2.1

Replacing Existing Thermostat

Always turn off power to the air conditioning or heating system prior to removing

existing thermostat.

Remove the cover of your old thermostat and locate the wire terminals. Do not

remove wires from terminals yet.

Using small pieces of masking tape, label wires prior to removal from terminals. Use

the chart below to determine the new terminal designations for your new thermostat.

Old Terminal from New Terminal for

Existing Thermostat New Thermostat Terminal Description

R, V-VR or VR-R R 24 VAC

B O Reversing Valve (Cooling)

O B Reversing Valve (Heating)

C C 24 VAC common

Y, Y1 or M Y Cooling

W, E or W1 W1 1st Stage Heating

G or F G Fan Control

W1, W2 or W-U W2 2nd Stage Heating

USER MANUAL

READ ALL INSTRUCTIONS BEFORE PROCEEDING

CONTENTS

SPECIFICATIONS

INSTALLATION

TESTING YOUR NEW THERMOSTAT

PROGRAMMING

ADDITIONAL OPERATION FEATURES

TROUBLESHOOTING

WIRING DIAGRAMS

1 2 3 4 5 6 7

Summary of Contents

Page 1 - USER MANUAL

MODEL2100Builder Series5-2 Day ProgrammableMulti-Stage 2 Heat/1 Cool Digital ThermostatCompatible with low voltage multi-stage heat/cool system with u

Page 2 - NEW THERMOSTAT

2 3INSTALLATION22.1Replacing Existing Thermostat cont.4. After labeling and removing all wires from terminals, unscrew the existing thermostat sub-

Page 3 - PROGRAMMING

454.2Setting Current Time of Day and Day of WeekNOTE: It is important for you to set the current time of day (note AM/PM indicator in display), and

Page 4 - PROGRAMMING cont

6PROGRAMMING cont.44.4Setting Your Energy Saving Programs–Tips Before Starting• It is important for you to set the current time of day (note the AM/P

Page 5 - TROUBLESHOOTING

ADDITIONAL OPERATION FEATURES5cont.ADDITIONAL OPERATION FEATURES5cont.98NOTE: The installer can reset the thermostat and bypass the compressor protec

Page 6

10 11TROUBLESHOOTING6TROUBLESHOOTING6cont.SYMPTOM POTENTIAL SOLUTIONSYMPTOM POTENTIAL SOLUTIONVerify your program setpoint time entries. The heating a

Page 7 - Store this

12TROUBLESHOOTING6cont.WIRING DIAGRAM7SYMPTOM POTENTIAL SOLUTIONFan continues to run all the time whether the system is on or off.Check that the fan

Comments to this Manuals

No comments

Braeburn 2100 User Manual

Browse online or download User Manual for Equipment Braeburn 2100. Braeburn 2100 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Braeburn 2100