Braeburn 3220 Specifications download pdf (Page 9)

INSTRUCTIONS

TheInstallerSettingsmustbeproperlyconguredinorderforthisthermostattooperatecorrectly.TheInstaller

Settingsaremenudriven.Theportionofthesesettingsthatdonotapplytoyoursetupwillbeskipped.These

settingsareindicatedbelowwithcomments.Moredetailoneachsettingfollowsthistable.

1. PressandholddowntheRETURNand

 buttonsfor3seconds.

2. Releasebothbuttonsandtherstinstaller

 settingwillbedisplayed.

3. Changesettingsasrequiredusingthe

 orportionoftheSpeedBar

4. PressNEXTorBACKtomovetothenext

 orprevioussetting,pressRETURNtoexit.

No. Installer Setting Factory Setting Comments

(

Notes follow this table) Default Options (More information follows this table)

1  TemperatureScale F DEG F DEG SelectforFahrenheitdisplay

C DEG SelectforCelsiusdisplay

2  AutoChangeover oF AUTO oF AUTO DisablesAutoChangeovermode

ON AUTO EnablesAutoChangeovermode

11CONV Selectfor1H/1CConventionalsystem

22CONV Selectfor2H/2CConventionalsystem

3  SystemType 11CONV 11HP Selectfor1H/1CHeatPumpsystem

22HP Selectfor2H/2CHeatPumpsystem

32HP Selectfor3H/2CHeatPumpsystem

1HD SelectforHeatOnlyHydronicsystem

11HD SelectforHydronicHeat/1Csystem

4  1stStageDifferential 0.5 DIF1 0.5, 1.0or Selecta1ststagetemperaturedifferentialof.5°,

2.0 DIF1 1°or2°F(0.2°,0.5°or1°C)

5  2ndStageDifferential 2.0 DIF2 1.0, 2.0, 3.0, Selecta2ndstagetemperaturedifferentialof1°,

[note 1] 4.0, 5.0or 2°,3°,4°,5°or6°F(0.5°,1°,1.5°,2°,2.5°or3°C)

6.0 DIF2

6  3rdStageDifferential 2.0 DIF3 1.0, 2.0, 3.0, Selecta3rdstagetemperaturedifferentialof1°,2°,

[note 1] 4.0, 5.0or

3°,4°,5°or6°F(0.5°,1°,1.5°,2°,2.5°or3°C)

6.0 DIF3

7 1stStageFanControl HG FAN 1 HG FAN 1 Selectfor1ststageGasheating

[note 2] HE FAN 1 Selectfor1ststageElectricheating

8 EmergencyHeat] HE EMER HE EMER SelectforElectricEmergencyHeat

FanControl[note 3] HG EMER SelectforGasEmergencyHeat

 9 ReversingValve REVO REVO SelectforcoolactiveReversingValve(Oterminal)

  (O/BTerminal)[note 4] REVB SelectforheatactiveReversingValve(Bterminal)

10 FossilFuel AE AUX AE AUX SelectforElectricAuxiliaryheat(withcompressor)

BackupHeat[note 3] AG AUX SelectforGasAuxiliaryheat(withoutcompressor)

Installer Settings

9 Installer Guide

NOTE: Shaded areas below do not apply to the 3020.

1 2 3 4 5 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments

Braeburn 3220 Specifications Page 9

Comments to this Manuals

Related products and manuals for Thermostats Braeburn 3220