Braeburn 5300 User Manual download pdf (Page 10)

ADDITIONAL

OPERATION FEATURES

cont.

3.6 Extended Hold (Vacation) Mode

1. Press the HOLD button to bypass the program schedule. The current set point temperature will be held until

the HOLD condition is released. HOLD will show in the display.

2. Press the HOLD button again to return the thermostat to normal program operation.

3. The hold period lasts until the hold is released as in step number 2 above, or is limited to 24 hours if the

default was changed during programming of user settings (section 2.4.5).

NOTE: Extended Hold Mode is not available if the thermostat is in the non-programmable mode.

3.7 Filter Check Monitor (see section 2.4.2 for setting)

The Filter Check Monitor displays a reminder for required ﬁlter

replacement or cleaning, by ﬂashing the FILTER segment in the

display. See instructions on your ﬁlter or heating/cooling unit for

recommendations for interval setting. When the selected interval

has been reached, and required cleaning or replacement has been

performed, press the RETURN button in any normal mode to reset

the timer and turn off the warning.

3.8 UV Light Monitor (see section 2.4.3 for setting)

The UV Light Monitor displays a reminder for required replacement

of the bulb by ﬂashing the UV segment in the display. See instructions

provided with your UV source for recommendations on interval

setting. When the selected interval has been reached and required

replacement has been performed, press the RETURN button in any

normal mode to reset the timer and turn off the warning.

ADDITIONAL

OPERATION FEATURES

cont.

3.9 Humidiﬁer Pad Monitor (see section 2.4.4 for setting)

The Humidiﬁer Pad Monitor displays a reminder for required

replacement of the humidiﬁer pad by ﬂashing the HUMID PADS

segment in the display. See instructions on your ﬁlter or heating/

cooling unit for recommendations for interval setting. When the

selected interval has been reached, and required service has

been performed, press the RETURN button in any normal mode to

reset the timer and turn off the warning.

3.10 To Lock or Unlock the Keypad

NOTE: See section 2.4.8 for instructions on how to add a new

unlock code.

Press and hold both the and buttons at the same time. Lock

will ﬂash. Continue to hold the and buttons for 5 seconds.

The display will change to 000 as shown in Figure A. Using the

button, change the ﬁrst digit and press the RETURN button.

Using the same buttons ( and RETURN), change the second

and third digit. Pressing RETURN on the 3rd digit does the

following: the keypad will change to lock if it was unlocked, or

unlock if it was locked (Figure B). If the incorrect code is entered,

the display will show “no” (Figure C).

Figure A

Figure B

Figure C

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments

Braeburn 5300 User Manual Page 10

Comments to this Manuals

Related products and manuals for Thermostats Braeburn 5300